Information
- Base Equipment
- 2 Hyd Outlets
- Loader
- Cab
Highlights
- $34,500.00
- Fairmont
- Pre-Owned
- 25850S
- 2017
- Case IH
- Farmall 55C CVT
- ELRFC075LPAP00860
- R7531E4
- 800
- Axle Output End, Flange or Bar: Flange | Drawbar: 2-position swinging
- Chain Variator Drive | Description: Continuously Variable Transmission | Speeds: Infinite | Creeper Range Available: Yes, with CVT | Shuttle (Forward-Reverse) Available: Standard
- Available
- to Top of Cab: 92.7 in (2355 mm)
Specifications
- 2017
- Case IH
- Farmall 55C CVT
- Base
- Utility
- R7531E4
- Case IH FPT
- Advertised Engine Power, Rated: 53 hp (39.5 kW) | Maximum: Same as advertised | Power Boost:No boost
- 2600 RPM
- Wastegate Turbocharger, aftercooled
- Fan Drive Type: Belt
- Tier 4B / Final | Cleanup Catalyst (CUC): No | Diesel Oxidation Catalyst (DOC): DOC standard
- Selective Catalytic Reduction: No | Exhaust Gas Recirculation (EGR): Internal EGR | Pipe: Horizontal
- Number: 3
- 136 cu in (2.23 L)
- 3.70 in (94 mm)
- 4.21 in (107 mm)
- Chain Variator Drive | Description: Continuously Variable Transmission | Speeds: Infinite | Creeper Range Available: Yes, with CVT | Shuttle (Forward-Reverse) Available: Standard
- 540 RPM
- Independent
- np
- Front Steer
- High Pressure Common Rail | Control: Electronic | Diesel Particulate Filter (DPF): Particulate Matter Catalyst
- Direct
- Service: Wet multi disc
- 10-16.5, 6PR R4
- 17.5Lx24, 6PR R4
- 4WD
- System Rating, Volts: 12 V
- Rating ROPS: 75 amp | Rating Cab: 90 amp
- Forward: 18.6 mph (29.9 kph)
- System: Open center
- Dual gear
- Implement Pump: 9.7 gpm (36.9 Lpm)
- Axle Output End, Flange or Bar: Flange | Drawbar: 2-position swinging
- 3-Point Hitch Category: Category 1 | Draft Sensing or Lift Control: Position control | Draft Link Ends Telescopic: Yes
- MFD/4WD or track, incl. Hitch/Drawbar: 122 in (3098 mm)
- to Top of Cab: 92.7 in (2355 mm)
- 97.4 in (2473 mm)
- with standard wheels or tracks: 68.3 in (1735 mm)
- Trackbase, MFD/4WD or Track: 73.5 in (1867 mm)
- Tank: 13 gal (49.2 L)
- Capacity 24 Inches behind pin: 2,800 lb (1270 kg) | Standard Lift Capacity at lift pin: 3,541 lb (1606 kg)
- Weight, MFD/4WD w/ROPS: 4,190 lb (1900 kg)
- 4,940 lb (2240 kg)
- Block Design, Replaceable Liners: Parent bore block