Information
- Base Equipment
- Engine Make
- HP - SAE Net
- Max. Reach - Raised
- Tires - Std
- Lift Height to Pin
- Engine Model
- Engine C.I.D.
- Bucket Breakout Force
- Engine Cyls
- Engine Tier
- Load - Rated Operating
- Weight - Lbs.
- Wheelbase
- Load - SAE Tip Rating
- HP - Engine Gross
- Engine Fuel
- Cab w/Heat & Air
- Hi-Flow Hydraulics
- Power Quick Tach
- ISO Joystick controls
- Air ride seat
- Rear view camera
- Cold start package
- Counter weight kit
- Radio
- 2 speed
Photos
Highlights
- $62,500.00
- Slayton
- Pre-Owned
- 11031L
- 2023
- John Deere
- 330G
- 1T0330GMKPF453697
- 4TNV94FHT
- 1064
- Available
- No Bucket: 78 inches (1980 mm)
- To Hinge Pin: 132 inches (3350 mm) | Dump Height - Maximum Foundry: 106.1 inches (2690 mm) | Reach - Max Dump Height Foundry: 28 inches (710 mm)
Specifications
- 2023
- John Deere
- 330G
- Base
- General
- 4TNV94FHT
- Yanmar
- Tier 4
- Turbo. Intercooled
- 186.3 Inches³ (3.1 ltr)
- SAE Net: 88.5 hp (66 kW) | SAE Gross: 91.2 hp (68 kW) | Hydraulic Power: 42.1 hp (31.402 kW)
- 2500 rpm
- Max. Gross: 281.8 lbf / ft (382 Nm) | Axle Torque - Maximum: 6235 lbf / ft (8480 Nm)
- Drive Chain Rating: 100 - HD
- 14 - 17.5 - 12 PR Extra Wall
- Tipping Load - Foundry: 6000 lbs (2724 kg) | Breakout - Lift Foundry: 7000 lbf (31.1 kN) | Breakout - Bucket Foundry: 10300 lbf (45.8 kN)
- 12 mph (19.3 kph)
- 3450 PSI (237.87 bar)
- Output: 23.5 gallons (US) / min (80 lt/min)
- Rear Departure Angle: 29 Degrees | Dump Angle: 48 Degrees | Rollback - Ground Level: 35 Degrees
- No Bucket: 122 inches (3100 mm) | With Bucket Foundry: 146 inches (3710 mm)
- No Bucket: 78 inches (1980 mm)
- 86.3 inches (2190 mm)
- To Hinge Pin: 132 inches (3350 mm) | Dump Height - Maximum Foundry: 106.1 inches (2690 mm) | Reach - Max Dump Height Foundry: 28 inches (710 mm)
- 9.7 inches (250 mm)
- 49.9 inches (1270 mm)
- 25.5 gallons (US) (96.5 ltr)
- Rated Operating Capacity - Foundry: 3000 lbs (1362 kg)
- Foundry: 9900 lbs (4495 kg)
