Miller Sellner

Specifications

• 2017 New Holland L234 Base
• Year2017
• ManufacturerNew Holland
• Model NameL234
• Trim NameBase
• Generic Type (Primary)General
• DimensionsBucket hinge pin: 131 in (3327 mm)| Top of ROPS: 80.4 in (2042 mm)| Bottom of level bucket, fully raised: 124.2 in (3155 mm)
• Overall Length(without attachment with coupler): 118.9 in (3021 mm)
• Raking Angle DegreesDump angle, degrees: 54.7°| Rollback, bucket on ground, degrees: 32.8°| Rollback, bucket at full height, degrees: 84.8°| Angle of departure, degrees: 26.5°
• Wheelbase52 in (1322 mm)
• Ground Clearance9.5" (243 mm)
• Overall Width76 in (1930 mm)
• Engine ManufacturerFPT / F5BFL413E B002
• Bore3.9" (99mm)
• Stroke4.3" (110mm)
• Displacement207.5 cu in (3.4 L)
• Fuel InjectionHPCR Direct
• Engine PowerHorsepower per SAE J1349 Gross: 90 hp (67 kW) @ 2500 rpm| Horsepower per SAE J1349 Net: 84 hp (63 kW) @ 2500 rpm
• Engine Torque (rpm)Peak: 282 lb - ft (383 Nm) @ 1400 rpm
• Drivetrain
• Operating SpeedTravel speed, low range: 7.7 mph (12.4 km/h)
• Performance
• Operating ConditionsRated operating load, 50% tip: 3,400 lbs (1542 kg)| Tipping load: 6,800 lbs (3084 kg)| Breakout force, lift cylinder: 6,918 lbs (30.8 kg) | Breakout force, bucket cylinder: 9,323 lbs (41.5 kg)
• Capacities
• Maximum PressureRelief pressure: 3,450 PSI (238 bar)
• Hydraulics
• Hydraulic FlowPump flow, Standard Flow: 24.2 gpm (91.5 Lpm)
• Weights
• Weight, In Running Order8,900 lbs (4045 kg)