Back

2024 John Deere 330G

MoreLess
Limited Time Offer!

Selling Price -$63,000.00

No Images Available

Selling Price -

$63,000.00

HD Certified Pre-Owned
  • Base Equipment
  • Power Quick Tach
  • Engine Fuel
  • HP - Engine Gross
  • Load - SAE Tip Rating
  • Wheelbase
  • Weight - Lbs.
  • Load - Rated Operating
  • Engine Tier
  • Engine Cyls
  • Engine C.I.D.
  • Engine Model
  • Lift Height to Pin
  • Tires - Std
  • Engine Make
  • Cab w/Heat & Air
  • Power Quick Tach
  • ISO Joystick
  • Air ride seat
  • Rear view camera
  • Cold start package
  • Single set counterweight
  • Radio
  • 2 speed
  • Standard flow
  • 2024
  • John Deere
  • 330G
  • Base
  • General
  • 4TNV94FHT
  • Yanmar
  • Tier 4
  • Turbo. Intercooled
  • 186.3 Inches³ (3.1 ltr)
  • SAE Net: 88.5 hp (66 kW) | SAE Gross: 91.2 hp (68 kW) | Hydraulic Power: 42.1 hp (31.402 kW)
  • 2500 rpm
  • Max. Gross: 281.8 lbf / ft (382 Nm) | Axle Torque - Maximum: 6235 lbf / ft (8480 Nm)
  • Drive Chain Rating: 100 - HD
  • 14 - 17.5 - 12 PR Extra Wall
  • Tipping Load - Foundry: 6000 lbs (2724 kg) | Breakout - Lift Foundry: 7000 lbf (31.1 kN) | Breakout - Bucket Foundry: 10300 lbf (45.8 kN)
  • 12 mph (19.3 kph)
  • 3450 PSI (237.87 bar)
  • Output: 23.5 gallons (US) / min (80 lt/min)
  • Rear Departure Angle: 29 Degrees | Dump Angle: 48 Degrees | Rollback - Ground Level: 35 Degrees
  • No Bucket: 122 inches (3100 mm) | With Bucket Foundry: 146 inches (3710 mm)
  • No Bucket: 78 inches (1980 mm)
  • 86.3 inches (2190 mm)
  • To Hinge Pin: 132 inches (3350 mm) | Dump Height - Maximum Foundry: 106.1 inches (2690 mm) | Reach - Max Dump Height Foundry: 28 inches (710 mm)
  • 9.7 inches (250 mm)
  • 49.9 inches (1270 mm)
  • 25.5 gallons (US) (96.5 ltr)
  • Rated Operating Capacity - Foundry: 3000 lbs (1362 kg)
  • Foundry: 9900 lbs (4495 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $63,000.00
  • Slayton
  • Pre-Owned
  • 11030L
  • 2024
  • John Deere
  • 330G
  • 1T0330GKCRF458287
  • 4TNV94FHT
  • 1163
  • Available
  • No Bucket: 78 inches (1980 mm)
  • To Hinge Pin: 132 inches (3350 mm) | Dump Height - Maximum Foundry: 106.1 inches (2690 mm) | Reach - Max Dump Height Foundry: 28 inches (710 mm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.